Starting the setup, Set menu, 1 auto:menu – Yamaha HTR-5760 User Manual

Page 30: Result:wiring

Advertising
background image

26

AUTO SETUP

For best results, make sure the room is as quiet as possible
during the auto setup procedure (YPAO). If there is too
much ambient noise, the results may not be satisfactory.

y

If your subwoofer has adjustable volume and crossover/high cut
frequency controls, set the volume between 9 and 11 o’clock (as
viewed on a conventional clockface) and set the crossover/high
cut frequency to the maximum.

1

Switch on this unit and your video monitor.

Make sure the OSD is displayed.

2

Press AMP.

3

Press SET MENU.

4

Press

u

/

d

to select AUTO SETUP.

5

Press SELECT to enter AUTO SETUP.

6

Press

u

/

d

to select SETUP, then press

j

/

i

to select the desired setting.

AUTO

To perform the auto setup procedure
(YPAO).

RELOAD

To reload the last auto setup (YPAO)
settings to override any manual
changes.

UNDO

To undo the last auto setup (YPAO) and
restore the previous settings.

DEFAULT

To restore the factory preset (default)
setup parameters.

y

You can choose RELOAD or UNDO only if you have
already performed auto setup.

7

Press

d

to select START, then press SELECT

to start the setup procedure.

• If you selected AUTO in step 6, loud test tones will

be output from each speaker in turn; WAIT appears
during the auto setup procedure.

• If you selected DEFAULT, RELOAD or UNDO in

step 6, no test tones are output.

The RESULT:WIRING screen appears after all items
have been measured and set.

• If an ERROR screen appears, see “If an error

screen appears” on page 27.

• If a WARNING screen appears, see “If a warning

screen appears” on page 28.

Starting the setup

VOLUME

MIN

MAX

CROSSOVER/

HIGH CUT

MIN

MAX

Subwoofer

AMP

MENU

SET MENU

A/B/C/D/E

SELECT

PRESET/CH

SET MENU

. ;AUTO SETUP

;MANUAL SETUP

[ ]/[ ]:Up/Down
[SELECT]:Enter

p

p

SELECT

PRESET/CH

1 AUTO:MENU

. SETUP;;;;;;;AUTO

START

Automatic
processing
of all items
[ ]/[ ]:Up/Down
[<]/[>]:Select

p

p

1 AUTO:MENU

SETUP

;;;;;;;AUTO

. START

Automatic
processing
of all items
[ ]/[ ]:Up/Down
[SELECT]:Start

p

p

FRONT L

;;;;;;;OK

[<]/[>]:Select
[SELECT]:Return

RESULT:WIRING

00_HTR-5760_U_EN.book Page 26 Tuesday, February 17, 2004 10:47 AM

Advertising