Yamaha HTR-5760 User Manual
Page 73
69
English
SOUND FIELD PARAMETER DESCRIPTIONS
ADDITIONAL
INFO
RMA
T
IO
N
■
DIALG.LIFT (Dialog lift)
Function:
This parameter adjusts the height of the front and center channel sounds by assigning some of the front
and center channel elements to the presence speakers.
Description:
The larger the parameter, the higher the position of the front and center channel sound.
Choices:
0/1/2/3/4/5, initial setting is 3.
For 7ch Stereo
Function:
These parameter adjusts the volume level for each channel in 7-channel stereo mode.
Control Range: 0 – 100%
■
CT LEVEL (Center level)
■
SL LEVEL (Surround left level)
■
SR LEVEL (Surround right level)
■
SB LEVEL (Surround back level)
■
PR LEVEL (Presence level)
For PRO LOGIC IIx Music and PRO LOGIC II Music
■
PANORAMA
Function:
Extends the front stereo image to include the surround speakers for wraparound effect.
Choices:
OFF/ON, initial setting is OFF.
■
DIMENSION
Function:
Gradually adjusts the sound field either towards the front or towards the rear.
Control range:
–3 (towards the rear) to +3 (towards the front), initial setting is STD (standard).
■
CT WIDTH (Center width)
Function:
Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the
center image towards the front left and right speakers.
Control range:
0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only
from front left and right speakers), initial setting is 3.
For PRO LOGIC IIx Movie, Music and Game
■
PLII/PLIIx (Pro Logic II/Pro Logic IIx)
Function:
Switches the type of Pro Logic decoding to be used. PLII decoding creates 5.1-channel sound from 2-
channel sources. PLIIx decoding creates 6.1/7.1-channel sound from 2-channel sources.
Choices:
PLII, PLIIx
For DTS Neo:6 Music
■
C. IMAGE (Center image)
Function:
This parameter adjusts the center image from all three front speakers to varying degrees.
Control range:
0 – 0.5
00_HTR-5760_U_EN.book Page 69 Tuesday, February 17, 2004 10:47 AM