Zanussi ZDC 67550W User Manual

Page 11

Advertising
background image

use electrolux 11

laundry.

“Empty Tank”” light
This light comes on at the end of the

programme to remind you that the water

reservoir must be emptied out. If this light

illuminates during a programme this means

that the water reservoir is full. The buzzer

sounds, the programme stops, the light of

the Start/Pause button flashes. This light

comes on also when the water reservoir is

not inserted correctly.

“Filter” light
This light illuminates at the end of the

programme to remind you that the

filters must be cleaned.
“Condenser” light
It comes on every 80 cycles to remind you

that the condenser must be cleaned.

Cancelling a programme
Turn the selector dial to “Off” to cancel

a programme which is running. You

can now select a new pr

ogramme.

At the end of the programme
If the laundry is not removed at the end

of the cycle, the dryer performs an anti-

creasing phase (duration: 30 minutes

maximum).

If you do not remove the laundry, the

dryer will stop automatically at the

end of the anti-creasing phase.

Lights End/Anticrease, Filter and
Condenser remain lit and the buzzer

sounds for 2 minutes.

Turn the programme selector dial to “Off”

to switch the machine off. Remove the

laundry from the drum and carefully

check that the drum is empty.

If you open and then close the door

before turning the selector dial to

“Off” all the lights corresponding to

the phases making up the performed

programme come on.

After each use

• Clean the filters.
• Empty the water reservoir.

Important!

If the drying programme has to be

stopped before it reaches the end, we

recommend that you turn the pro-

gramme selector dial to position Cooling

and wait until the end of this cooling

phase before removing the laundry. This

will avoid a build-up of heat inside the

appliance.To do this first turn the dial to

“Off” and then to Cooling and depress

Start button.

Modifying the programme
To change a programme which is run-

ning, first cancel it by turning the pro-

gramme selector dial to “Off”. Select the

new programme and press the Start

button .

GB

125987350.qxp 2007-01-09 15:02 Page 11

Advertising