Zanussi ZDC 67550W - Manual (Page 21)

GB
something not working electrolux 21
Malfunction Possible cause Solution
When pressing a button,
the corresponding button
flashes several times.
● Washing protection.
After the start of the pro-
gramme, the option can no
longer be set. ●
Turn the programme knob
to OFF. Set the
programme again
Programme inactive,
Empty Tank
light illumina-
ted. :
●
Condensation tank is full.
● Empty condensation tank,
then start programme with
START/PAUSE button.
Drying cycle ends shortly
after programme starts.
END light illuminated.
● Not enough washing
loaded
or washing loaded is too
dry for selected program-
me.
● Select time programme or
higher drying level (e.g.
EXTRA DRY instead of
CUPBOARD).
Drying cycle lasts an
unusually long time.
Note:
After around 5 hours the
drying cycle ends automa-
tically (see „Drying cycle
complete“)
●
Lint filter clogged.
●
Heat exchanger clogged
with lint.
● DELICATE button
pressed and load volume
too big.
●
Load volume too big.
● Laundry insufficiently
predrained.
●
Clean lint filter
● Clean heat exchanger.
●
DELICATE is only suitable
for use with loads of up to
3 kg!
● Reduce load volume.
●
Laundry must be
adequately pre-drained.
125987350.qxp 2007-01-09 15:02 Page 21