X10 Wireless Technology UR24A - Manual (Page 6)

11 10
VOLUME
Works like your original remote. Also
used to brighten and dim lamps
connected to X-10 Modules.
TIMER
Used to set the Sleep Timer to
automatically switch off the TV or X-10
Modules after a preset time.
L1, L2
Lets you learn additional keys from
your original remote.
DISP
Used to access on-screen information
or CD programming.
PLAY, REW, FF, STOP
Work the same as on your original
VCR remote.
S E L E C T
Used for menu selections on DSS
satellite receivers.
GUIDE
Displays the main menu on DSS
satellite receivers.
R E C
Record button. Works the same as
your original VCR remote. You must
press the REC button twice to begin
recording.
PAUSE
Works the same as your original VCR
remote.
S
ETTING
U
P
YOUR
S
UPER
R
EMOTE
B
UTTON
D
ESCRIPTIONS
INDICATOR LIGHT
The indicator light flashes when the
remote is operating.
POWER
Works in the same way as your original
remote.
SET UP
Used for programming the remote.
BACKLIGHT
Lights up the keys for a few seconds
when pressed.
LEARN
Lets you learn codes from an existing
remote, that might not be in the Learning
SuperRemote’s library.
X-10
Lets you control X-10 Modules to operate
lamps and appliances around the home.
TV, VCR, CBL, CD, AUX1, AUX2,
SAT
Used to select the device to control.
SAT includes DSS receivers.
SHIFT
Lets you learn another function under
the same key
0-9
Used as your original remote and to
enter device codes.
LAST
Selects the last channel viewed on
your TV, VCR, Cable Box or Satellite
Receiver.
CHANNEL
Works like your original remote. Also
used to turn X-10 Modules on and off.
MUTE
Works the same as your original
remote.