Yamaha MDX-E300 - Manual (Page 10)

8
DIGITAL OUT
OPTICAL
DIGITAL IN DIGITAL OUT
OPTICAL OPTICAL
ANALOG DIGITAL
OPTICAL
SYSTEM
CONNECTOR IN
L
D OUT
1
IN
2 OUT
R
C
Connecting your audio system
Digital connections
GETTING STARTED
Notes for digital connections
• The DIGITAL OPTICAL IN jacks can be connected to any component with an optical output so you can make direct digital recordings.
• The DIGITAL OPTICAL OUT jacks can be connected to any component with an optical input so you can output digital audio from an
MD.
• Before making OPTICAL connections, remove the jack cover(s).
• In order to protect the jacks from dust, be sure to attach the jack covers when the optical jacks are not being used.
Analog connections
Notes for analog connections
• The white plug on the audio pin cables corresponds to the L (left) channel and the red plug corresponds to the R (right) channel. Be sure
to connect L (left) to L and R (right) to R. Also make sure that the plugs are fully inserted and that the connection is firm.
• The ANALOG OUT jacks on this unit should be connected to the MD PLAY jacks on your amplifier.
The ANALOG IN jacks on this unit should be connected to the MD REC jacks on your amplifier.
MD/TAPE
ANALOG DIGITAL
OPTICAL
SYSTEM
CONNECTOR IN
L
D OUT
1
IN
2 OUT
R
C
This unit (MDX-E300)
Optical cable
Audio pin cables
CD player (etc.) with
optical OUT
Amplifier/Receiver
with optical IN/OUT
Optical cable
Optical cable
This unit (MDX-E300)
Amplifier/Receiver
To AC outlet
To AC outlet
0103MDXE300(M).1-8.E 02.5.17, 10:53 AM 8