ZyXEL Communications P-2602R-DxA Series - Manual (Page 50)

P-2602R/RL-DxA Series User’s Guide
50 Chapter 2 Introducing the Web Configurator
Phone Book Speed Dial Use this screen to configure speed dial for SIP phone numbers that you call
often.
Incoming Call
Policy
Use this screen to configure call-forwarding.
PSTN Line General Use this screen to configure your ZyXEL Device’s settings for PSTN calls.
Security
Firewall General Use this screen to activate/deactivate the firewall and the default action to
take on network traffic going in specific directions.
Rules This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Anti Probing Use this screen to set whether or not your device will respond to pings and
probes for services that you have not made available.
Threshold Use this screen to configure the thresholds for determining when to drop
sessions that do not become fully established.
Content Filter Keyword Use this screen to block access to web sites containing certain keywords in
the URL.
Schedule Use this screen to set the days and times for your device to perform content
filtering.
Trusted Use this screen to exclude a range of users on the LAN from content
filtering.
Advanced
Static Route Static Route Use this screen to configure IP static routes to tell your device about
networks beyond the directly connected remote nodes.
Bandwidth
MGMT
Summary Use this screen to configure bandwidth management on an interface.
Rule Setup Use this screen to define a bandwidth rule.
Monitor Use this screen to view the ZyXEL Device’s bandwidth usage and
allotments.
Dynamic DNS This screen allows you to use a static hostname alias for a dynamic IP
address.
Remote MGMT WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the ZyXEL Device.
Telnet Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the ZyXEL Device.
FTP Use this screen to configure through which interface(s) and from which IP
address(es) users can use FTP to access the ZyXEL Device.
SNMP Use this screen to configure your ZyXEL Device’s settings for Simple
Network Management Protocol management.
DNS Use this screen to configure through which interface(s) and from which IP
address(es) users can send DNS queries to the ZyXEL Device.
ICMP Use this screen to set whether or not your device will respond to pings and
probes for services that you have not made available.
UPnP General Use this screen to turn UPnP on or off.
Maintenance
Table 5 Navigation Panel Summary
LINK TAB FUNCTION