ZyXEL Communications P-2602R-DxA Series - Manual (Page 71)

P-2602R/RL-DxA Series User’s Guide
Chapter 5 Bandwidth Management Wizard 71
5 Follow the on-screen instructions and click Finish to complete the wizard setup and save
your configuration.
Figure 32 Bandwidth Management Wizard: Complete
Priority Select High, Mid or Low priority for each service to have your ZyXEL Device use a
priority for traffic that matches that service.
A service with High priority is given as much bandwidth as it needs.
If you select services as having the same priority, then bandwidth is divided equally
amongst those services.
Services not specified in bandwidth management are allocated bandwidth after all
specified services receive their bandwidth requirements.
If the rules set up in this wizard are changed in Advanced, Bandwidth MGMT, Rule
Setup, then the service priority radio button will be set to User Configured.
The Advanced, Bandwidth MGMT, Rule Setup screen allows you to edit these rule
configurations.
Back Click Back to go back to the previous wizard screen.
Apply Click Apply to save your changes back to the ZyXEL Device.
Exit Click Exit to close the wizard screen without saving your changes.
Table 15 Bandwidth Management Wizard: Service Configuration
LABEL DESCRIPTION