Yamaha RX-V590RDS User Manual
Page 17
Advertising
1
Select the source to be recorded.
2
Play the source and then turn the VOLUME control
up to confirm the input source. (For detailed information
on the tuning operations, refer to page 19.)
3
Set the tape deck or VCR to the recording mode.
4
If the tape deck is used for recording, you can monitor
the sounds being recorded by pressing TAPE
MONITOR.
Note
DSP, VOLUME, BASS, TREBLE and BALANCE control
settings have no effect on the material being recorded.
17
English
TO RECORD A SOURCE TO TAPE
(OR DUB FROM TAPE TO TAPE)
VIDEO AUX
VCR 2
VCR 1
LD/TV
TAPE
MONITOR
TUNER
CD
PHONO
VIDEO AUX
VCR 2
VCR 1
LD/TV
TAPE
MONITOR
TUNER
CD
PHONO
1, 4
2
Advertising