Yamaha RX-V1200 - Manual (Page 70)

66
ZONE 2
■ Special considerations when using DTS software
The DTS signal is a digital bitstream. Therefore, if you attempt to send the DTS signal to the second room, you will
only be able to hear the digital noise sound that could damage your speakers.
Due to this characteristic of DTS encoded discs, the following considerations and adjustments need to be made.
For LDs or DVDs encoded with DTS
Only 2-channel analog audio signals may be sent to the second room, as follows:
• LDs
Set your LD player’s left and right outputs to the analog soundtrack.
• DVDs
Use the disc menu to set the DVD player’s mixed 2-channel left and right audio outputs to the PCM or Dolby Digital
soundtrack.
For CDs encoded with DTS
DO NOT USE the Zone 2 feature for CDs encoded with DTS to avoid unexpected noise.
0110V1200_65-66_EN(UA) 01.7.6, 9:32 AM 66