Interrupting a scan job, Press the <interrupt> button on the control panel, Select [scan – Xerox 701P44973 User Manual
Page 86: Set the original aligning with the original guide, Press the <start> button
4 Scan
78
Xerox 6204 Wide Format Solution
S
can
4
Interrupting a Scan Job
You can interrupt the current print job for an urgent scan job.
Note
• You cannot interrupt a copy job for a scan job.
1
Press the <Interrupt> button on the control
panel.
The <Interrupt> indicator is blinking. It indicates the
interrupt has been requested. The current print job is
suspended.
When the interrupt is ready, the <Interrupt> indicator is lit
(no longer blinking).
2
Select [Scan].
3
Set the mailbox and other features for the
interrupt.
4
Set the original aligning with the original guide.
For information about the procedure to set the originals, refer to "Step 3 Starting a Scan Job"
5
Press the <Start> button.
6
When the interrupt is completed, press the <Interrupt> button again.
The interruption mode is cancelled, and the suspended job resumes.
Note
• The interruption mode will be automatically cancelled after 30 seconds has elapsed without
scan operation.
4
7
2
5
8
0
3
6
9
Transmitting
Machine Status
Log In/Out
Jobs in Memory
Original/
Copy
Scan
Menu
Power Saver
Clear All
Copy from
Stop
Start
Interrupt
Media Settings
Memory
.
C
1
<Interrupt> button
Menu
Copy
Scan
Language
Create/Delete
Stored
Programming