Zoom R24 - Manual (Page 29)

28
A
u
d
io i
nt
er
fa
ce m
an
u
al
Working with patches
After making many changes, you can restore a patch to its pre-edited settings by
initializing it. This will return it to its factory preset condition.
1
Press EFFECT.
Turning effects on/off
Insert effect
Send return effect
Patch initialization (factory reset)
EFFECT > INITIAL
Selecting insert effect/reverb patches
To use an insert effect, select an algorithm and
a patch.
To use a send reverb effect, select a patch.
(Reference:
Operation Manual )
Editing patches (EDIT)
By adjusting effect module parameters and
levels, you can create the desired result. (Refer-
ence:
Operation Manual )
Importing patches (IMPORT)
All effect algorithms (and reverb patches) or
a single one can be imported from a selected
project on the R24.
(Reference: Operation Manual )
In audio interface mode, one complete set of effect
data is saved for the mode. There are no project
based settings.
Saving patches (SAVE)
Edited patches can be saved.
(Reference: Operation Manual )
Initializing patches (INITIAL)
Restores patches to their original factory set-
tings (only available in audio interface mode).
Changing patch names (RENAME)
The name of the currently selected patch can
be changed.
Patch operation menu
Patch operations
For both insert and send return effects
The following example is of an insert
effect.
Press the beneath .
Press the beneath .
Turn the effect On .
2
Select INITIAL .
3
Press ENTER.
Change
menu
4
Select YES .
Press ENTER.
Change
menu
Change