Zebra Technologies Zebra S Series 105SL - Manual (Page 87)

Data Ports
Serial Data Port
11342L Rev. 8 6/4/2004 105SL User Guide 63
RS-422/RS-485 Interconnections
To connect the printer’s RS-232 DB-9 interface to a host computer through an RS-422 or an
RS-485 interface, an interface adapter is required (part number 33130).
Figure 37 illustrates
the required cable wiring for interconnecting to the interface adapter’s DB-25 female
connector.
Figure 37 • DB-25 Adapter Connections
Note • A jumper on the computer’s main logic board needs to be installed on JP1, Pins 2 and
3, for the RS-422/RS-485 interface adapter to function properly.