Xerox DocuMate 632 - Manual (Page 58)

DocuMate 632 Scanner User’s Guide 53
Scanning
• Duplex—Scan both sides of the page. If this option is not
selected, the scanner will scan the front side of the page
only.
• Skip Blank Originals—Skips pages that are completely
blank. Typically you use this option when you will scan a
stack of two-sided pages which have a number of blank
sides. This option is only available for Duplex scanning.
• Color Filter—Color filter is the ability of your scanner to
automatically remove a color from a scanned item. For
example, if you are scanning a letter with a red watermark,
you can choose to filter out the red so the scanned letter
just shows the text and not the red watermark. Color filter
applies to Black&White or GrayScale Mode.
8. Click the Advanced Settings tab.
The options of the Advanced Settings tab are for the Color or
Grayscale scanning mode.
NOTE: Regardless of the One Touch setting, the scanner
button always takes precedence. In other words, even if the LED
number on the scanner has a setting for Duplex, when you press
the Simplex scanner button the scanner scans in Simplex mode,
and vice versa.
The original with a red
watermark over black text. The scanned item with the
red filtered out.