Xerox DocuMate 632 - Manual (Page 65)

Scanning
60 DocuMate 632 Scanner User’s Guide
14. Now click the arrow buttons to select a scanner button for each
new configuration. Click Apply to set that button for that
configuration.
The following examples show that buttons 7 and 8 have been
set to scan to each of the new configurations.
Note that the button names have also been changed to Storage
1 and Storage 2 to remind you that both send documents to
storage, but to different locations. To change button names,
see “Renaming a One Touch Button” on page 46.
Scan to multiple storage folders:
1. Insert the documents you want to scan to multiple storage
folders.
2. Press the Destination Selector buttons on the scanner to get
to one of the buttons set up for scanning to storage.
3. Press the Simplex or Duplex button to scan the documents.
4. When scanning is finished, put the next set up documents into
the scanner and press the Destination Selector buttons to get
to the next button you have set up for scanning.
5. Press the Simplex or Duplex button to scan the documents.
When scanning is finished, the documents are stored in the two
separate folders.