Zanussi ZT 1014 - Manual (Page 10)

10
7. At the end of the programme
The machine stops automatically.
If you have depressed the RINSE HOLD PLUS button,
the machine will stop with the water left in the tub, to
prevent the fabric from creasing. To drain the water and
spin, release the same button. To drain only, select
programme “P”.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
132996170.qxd.qxd 7/19/01 2:41 AM Pagina 10 (Nero/Process Black pellicola)