Zanussi ZT 1014 - Manual (Page 6)

1 Programme guide
2 Mains-on light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
3 ON-OFF button
By depressing this button the machine starts operating.
When depressed again, the machine stops.
The push button is provided with a child-proof safety
lock. Move the small slider placed in the middle of the
button downwards to lock the button in the «off»
position.
4 QUICK WASH button
By depressing this button on programmes A, B, C, D
and G the wash time is reduced.
This is suitable only for garments which are lightly
soiled.
6
The Control Panel
1 2 3 4 5 6 7
A Q U A C Y C L E
HALF LOAD ON-OFF QUICK WASH
PROGRAMMES
RINSE
HOLD PLUS
1 0 1 4 Z T
5 RINSE HOLD PLUS button
Press this button to make the machine stop with water
in the drum after the cotton, synthetic or delicate wash
cycles.
This prevents any creasing which may occur if the
clothes are left damp in the drum. When it is
convenient for you to empty the machine, simply press
this button again so that the machine can proceed to
drain and spin, or select the drain programme “P”.
If this button is not activated, the washing programmes
will end with a spin.
6 HALF LOAD button
Select this button to reduce water consumption on the
rinse cycle when washing a smaller load of cottons or
linens (maximum load size = 2.25 kg).
7 Programme selector dial
Push the dial to pop it out. Turn the dial clockwise to
select the required wash programme.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button
again.
132996170.qxd.qxd 7/19/01 2:41 AM Pagina 6 (Nero/Process Black pellicola)