ZyXEL Communications Version 1.03 - Manual (Page 143)

NetAtlas Workgroup User’s Guide
143
C
H A P T E R
14
Switch Configuration
This chapter shows how to configure switch settings such as priority queuing, STP, link
aggregation and GARP timer.
14.1 Switch Setup
Use the switch setup screen to set a VLAN type, a queuing method and enable or disable
features in the Active Control panel.
To open this screen, right-click on the switch in the Device List Panel, and click
Configuration > Switch Configuration > Switch Setup.
Figure 100 Switch Configuration: Switch Setup