Xerox DOCUCOLOR M123 - Manual (Page 6)

Page 6 WorkCentre M128/M123 Reference Guide
dc05cc0364
Feature Implementation Values
Quantity <</NumCopies value >>
setpagedevice
Where value is one of the following:
integer from 1 to 9999: number of copies
null: Not specified
Collation <</Collate value >>
setpagedevice
Where value is one of the following:
true = collated
false* = uncollated
Jog <</Jog int >>setpagedevice Where int is one of the following:
0 = Do not offset
3 = Offset at the beginning of each page
[set]
Stapling <</Staple int1
/StapleDetails << /Type 7
/Location int2 >>
>>
setpagedevice
Where int1 is one of the following:
0* = Do not staple
3 = Staple at the end of each set
Where int2 is one of the following:
0* = top-left-single
1 = bottom-left-single
2 = top-right-single
3 = bottom-right-single
4 = top-double
5 = bottom-double
6 = left-double
7 = right-double
Interleaving
Paper
<</SlipSheet int1
/SlipSheetDetails << /Type 1
/AutoTraySelect int2
/SheetTray int3
/MediaClass (string) >>
>>
setpagedevice
Where int1 is one of the following:
0 = Do not deliver interleaving paper.
4 = Deliver interleaving paper at the end
of each page
Where int2 is one of the following:
0 = SheetTray is referred and feed
interleaving paper from the SheetTray
1* = Feed interleaving paper from a tray
following system setting. SheetTray is
not referred.
Where int3 is one of the following:
0* = Feed interleaving paper from Tray1
1 = Tray2
2 = Tray3
3 = Tray4
100 = SMH
Where string is same as the “Media
Class” feature. It means media class for
the interleaving paper.