Xerox DOCUCOLOR M123 - Manual (Page 7)

WorkCentre M128/M123 Reference Guide Page 7
dc05cc0364
Feature Implementation Values
Process Color
Model
<</ProcessColorModel name >>
setpagedevice
Where name is one of the following:
/DeviceGray
/DeviceRGB
(with Separations true)
/DeviceCMYK (with Separations true)
/DeviceCMY (with Separations true)
/DeviceRGBK (with Separations true)
Separations <</Separations value >>
setpagedevice
Where value is one of the following:
true = Multiple color separations will be
generated for each page of output.
false* = All colorants will be combined into a
single composite page on a single
sheet of physical medium.
Separation
Color Names
<</SeparationColorNames
value>>
setpagedevice
Where value is an array.
Legal element values are the process
colorant names implied by the process
color model.
Valid colorant names for each process
color model are like the following in case
of separation
DeviceCMYK = Cyan, Magenta, Yellow,
Black
DeviceCMY = Cyan, Magenta, Yellow
DeviceRGB = Red, Green, Blue
DeviceRGBK = Red, Green, Blue, Gray
DeviceGray = Gray
Separation
Order
<</SeparationOrder value>>
setpagedevice
Where value is an array.
Legal element values are the process
colorant names implied by the process color
model.
Use CIE Color <</UseCIEColor value>>
setpagedevice
Where value is one of the following:
true = Re-map each color from device
color space to device
independent’s CIE- based color
space
false* = Do not re-map color
Job Name
Job Type
Accounting
Delay Print
These features use PJL commands as described in “PCL/PJL Implementation.”
Refer to that section for information about these features.