Zoom 0335-A 27337 - Manual (Page 23)

Chapter 3: Specifying TCP/IP Settings 23
2222
Ensure the following is selected, depending on your situation:
! If you are logging into the Zoom Configuration
Manager: Ensure that Use the following IP address and
Use the following DNS server addresses are selected
and that the information in the table below appears in the
appropriate fields.
For this value… Enter…
IP Address Any value between 10.0.0.4 and 10.0.0.20.
For example, type 10.0.0.10.
Subnet mask 255.255.255.0
Default gateway 10.0.0.2
! If you are using dynamic IP addressing (DHCP):
Ensure that Obtain an IP address automatically is
selected and that either Obtain a DNS server address
automatically or Enable DNS is selected. All fields
should be blank.
! If you are using a static IP address: Ensure that Use
the following IP address and Use the following DNS
server addresses are selected. Enter the IP address,
Subnet mask, Default gateway, and Preferred DNS
server values given to you by your service provider.