Zoom 0335-A 27337 - Manual (Page 35)

Chapter 5: Advanced Setup Options 35
3333
From the Reboot Mode drop-down list, select Reboot From
Default Configuration.
4444
Click the Reboot button. Once this process is complete, your
unit is reset to its factory settings.
To perform a hard reset
If you lose your link to the unit and cannot communicate with it
via the Web browser, do the following to perform a hard reset:
1111
Insert a paper clip into the RESET pinhole in the center of
the modem’s back panel.
2222
Hold it there for five seconds. The unit’s LINK light will turn
off and then it will blink slowly, about once per second.
You are now guaranteed that all system settings are restored to the
modem’s factory defaults.