Care and cleaning, Operating problems – Zanussi ZWQ 6120 User Manual

Page 7

Advertising
background image

Programme / Type of washing

Load

Possible options

Spin : A spin cycle from 500 to 1200/1000

4)

after a Rinse hold (or Night cycle plus).

5,5 kg

Delay start

1) Reference programme for test conforming to CEI 456 standard ( Cottons 60° + Eco option) : 49 L / 0,94 kWh / 210 min

2) Not available with Eco programme.

3) Not available with programmes with wash temperatures of 40°C and above.

4) Depending on model.

Care and cleaning

Unplug the appliance before cleaning.

Descaling the appliance

To descale the appliance, use an appropriate non-corro-

sive product designed for washing machines. Read prod-

uct label for recommended amounts and how often des-

caling should be carried out.

The exterior

Use warm soapy water to clean the exterior of the appli-

ance. Never use alcohol, solvents or similar products.

Dispenser box

To clean, proceed as follows :

1

2

Object trap

Regularly clean out the object trap which is located at

the bottom of the drum :

1

2

3

Check if the filter being coupled well be-

fore closing the trap to pull up and down

the central wall.

Water inlet filters

To clean, proceed as follows :

Operating Problems

Numerous checks were carried out on your appliance be-

fore it left the factory. However, should you notice a mal-

function, please refer to the sections below before con-

tacting the after-sales service.

7

Advertising
This manual is related to the following products: