ZyXEL Communications ZYAIR B-4000 - Manual (Page 11)

ZyAIR B-4000
10
Figure 10 E-mail Service Setup
Select Yes to enable the ZyAIR to redirect
subscribers’ e-mail to the designated SMTP
server (must be reachable from the ZyAIR) in
the event that the subscriber’s own e-mail
server is unreachable from the ZyAIR. E-mail
recipients see messages as if they came from
the subscriber’s regular e-mail server not the
“backup” e-mail server.
When you select Yes, enter the e-mail
(SMTP) server’s domain name (up to 50
characters) or IP address in the designated
field.
Select No to disable e-mail redirect in the
event that the subscriber’s own e-mail server
is unreachable from the ZyAIR.
Click Next to continue.
4. Use this screen to set whether or not the ZyAIR authenticates users before allowing them to
access the Internet.
Figure 11 Authentication Service Setup
Select Yes to require the ZyAIR to
authenticate subscribers before allowing
Internet access. Set up accounts on the
ZyAIR using the ZyAIR’s web configurator or
the Exclusive printer. Figure 12 to Figure 18
show you how to do this. Click Next to
continue.
Select No to allow Internet access for all
subscribers without authentication. Click Next
to continue to Figure 19.
5. Use the next wizard screens to set up the ZyAIR to use either the “exclusive printer” to
generate and print subscriber statements or generate them in the web configurator and print
them from there. The “exclusive printer” is the printer that attaches directly to the ZyAIR. It
can have the ZyAIR generate subscriber statements and then print them.