ZyXEL Communications V500-T1 - Manual (Page 12)

ENGLISH
12
2.1.2 Set Up a Static IP Address
1 If you have an IP address to use, select Static
IP (Off) in the Advanced Setting > Network
Setting menu. Press the On softkey to have the
V500 use a static IP address.
The screen displays Static IP (On). Press Select
to enter your information.
2 Use the options in this menu to enter the static
IP address, gateway and DNS information
provided by your Internet Service Provider (ISP)
or network administrator. Press Back to return
to the previous screen.
2.1.3 Get an IP Address Automatically
"
The V500 is set to get an IP address automatically by default.
1 If you have neither a username and password
nor an IP address to use, select DHCP (Off) in
the Advanced Setting > Network Setting menu.
Press the On softkey to have the V500 use
DHCP.
DHCP allows your V500 to get an IP address
automatically. Press Back to return to the
previous screen.
Network Setting
1 PPPoE (Off)
2 Static IP (On)
3 DHCP (Off)
Select On Off Back
Static IP
1 IP Address
2 Default Gateway
3 Subnet Mask
4 1st DNS
5 2nd DNS
Select Back
Network Setting
1 PPPoE (Off)
2 Static IP (Off)
3 DHCP (On)
Select On Off Back