ZyXEL Communications V500-T1 - Manual (Page 13)

ENGLISH
13
2.2 Set up Your Voice Account
Follow these steps to configure your VoIP account.
1 Press the Menu key, then press 6 to enter the Advanced Setting menu.
2 Press 2 to enter the SIP Configuration menu.
3 If VoIP 1 Config. does not display Active, select
its entry and press the Active softkey. If the SIP
account is not active, you cannot use it to make
or receive calls.
4 Press 1 to select the SIP 1 Configuration menu. You can configure up to four SIP
accounts on the V500 (see the User’s Guide for details).
Enter the information exactly as given to you by your VoIP service provider.
"
If your VoIP service provider did not give you information to use for any of
the fields in this menu, leave them at their default settings.
The following table describes the fields in this menu.
FIELD DESCRIPTION
1 Display Name Choose a name for this SIP account. This name displays in the SIP
account’s tab on the V500’s LCD screen.
2 SIP Number This is your SIP account number. If you have a SIP account like
[email protected], the SIP Number is 1234567.
3 SIP Local Port This is the port on the V500 used for SIP calls. The default is 5060.
4 SIP Server Addr This is the IP address of the server your VoIP service provider uses for
SIP calls.
5 SIP Server Port This is the port on the SIP server used for SIP calls. The default is 5060.
6 SIP Register
Server This is the IP address of the server your VoIP service provider uses to
register the V500. If your VoIP service provider did not give you a
specific SIP register server address, enter the SIP Server address
again.
SIP Configuration
1 VoIP 1 Config. (On)
2 VoIP 2 Config. (Off)
3 VoIP 3 Config. (Off)
4 VoIP 4 Config. (Off)
Select On Off Back