Using multi-zone configuration, Connecting the zone 2 and zone 3 components, Using external amplifiers – Yamaha RX-V2700 User Manual

Page 123

Advertising
background image

USING MULTI-ZONE CONFIGURATION

121

En

English

AD

V

ANCED

OPERA

T

ION

This unit allows you to configure a multi-room audio/video system. The multi-zone configuration feature enables you to
set this unit to reproduce separate input sources in the main room, second room (Zone 2) and third room (Zone 3). You
can control this unit from the second or third room using the supplied remote control.

You need the following additional equipment to use the multi-room functions of this unit:
• An infrared signal receiver in the second and/or third room.
• An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second

and/or third room to the main room (to a CD player or DVD player, for example).

• An amplifier and speakers for the second and/or third room.
• A video monitor for the second room.

y

• You do not need an extra amplifier and speakers for the second and/or third room if you want to use the internal amplifiers of this unit.
• Since there are many possible ways to connect and use this unit in a multi-room configuration, we recommend that you consult with

your nearest authorized YAMAHA dealer or service center for the Zone 2 and Zone 3 connections that best meet your requirements.

Using external amplifiers

To use an external amplifier in Zone 2 or Zone 3, connect the external amplifier to ZONE OUT terminals and select
“EXT” in “Zone2 Amplifier” or “Zone3 Amplifier” (see page 104).

• Adjust the Zone 2/Zone 3 volume by using the amplifier in the second/third room when “Zone2 Volume” or “Zone3 Volume” are set to

“Fixed” (see page 104).

• To avoid unexpected noise, DO NOT use the Zone 2/Zone 3 feature with CDs encoded in DTS.

USING MULTI-ZONE CONFIGURATION

Only analog signals are sent to the second and third rooms. Any source you want to listen to in the second or third
room must be connected using the analog (AUDIO L/R) input jacks on this unit.

Connecting the Zone 2 and Zone 3 components

Notes

OUT

OUT

IN

REMOTE

IN

REMOTE

OUT

IN

REMOTE

REMOTE

This unit

YAMAHA

component

YAMAHA

component

Infrared signal

receiver

REMOTE OUT

VIDEO IN
AUDIO IN

MONITOR OUT

SP OUT

REMOTE IN

ZONE 2 AUDIO OUT

ZONE 3 AUDIO OUT

REMOTE IN

MAIN

ZONE 2

ZONE 3

ZONE 2 VIDEO OUT

Infrared emitter

DVD player

(or other component)

Amplifier

Remote control

Infrared signal
receiver

Amplifier

Remote control

Infrared signal
receiver

Second room

(Zone 2)

Third room

(Zone 3)

Main room

(Main zone)

SYSTEM

This unit

Advertising