ZyXEL Communications ZyXEL ZyWALL 5 - Manual (Page 389)

ZyWALL 5 User’s Guide
388 Chapter 24 Maintenance
Figure 208 Configuration Upload Error
24.10.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and
returns the ZyWALL to its factory defaults as shown on the screen. The following warning
screen will appear.
Figure 209 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyWALL. Refer to
Section 2.3 on page 56 for more information on the RESET button.
24.11 Restart Screen
System restart allows you to reboot the ZyWALL without turning the power off.
Click MAINTENANCE, and then Restart. Click Restart to have the ZyWALL reboot. This
does not affect the ZyWALL's configuration.