Zyliss PowerLite 835p - Manual (Page 10)

Epson PowerLite 835p
10 - Epson PowerLite 835p 10/04
Using the Direct Power On Function
The Direct Power On function enables fast and easy setup and
shut down. This feature is convenient for ceiling-mounted
projectors because you can simply flip a switch connected to
the power outlet for the projector to turn it on or off. For
desktop or table-top use, you can quickly unplug the projector
immediately without having to wait for it to cool down. Then
you can pack up the projector and go.
Follow these steps to enable Direct Power On:
1. Press the Menu button on the remote control and select the
Extended menu.
2. Choose Operation and press Enter .
3. Choose Direct Power ON and press Enter .
4. Highlight On and press Enter .
5. Press Esc or Menu to exit.
Using the Remote Control
The remote control lets you
access your projector’s
features from up to 30 feet
away, and from ± 25° above
or below and ± 45° left or
right of the projector’s
infrared receiver.
Note: If the projector does not respond to the remote control, make
sure batteries are installed and the switch on its side is turned on.
The projector also might not respond if the batteries are weak,
you’re standing at too great a distance from the projector, ambient
light is too bright, a certain type of fluorescent light is present, or
other equipment emitting infrared energy is present (such as a
radiant room heater).
Remote Comtrol Functions
Turn on
remote
control
Button Function
E-Zoom Zooms in on a portion of your image.
Page Advances to the next or previous image in a
slideshow.
Power Turns the projector on or off.
P in P Displays a picture-in-picture image.
Color
Mode Adjusts the vividness of the image color. You can
select from several settings and save a different
setting for each computer or video source.
A/V Mute Turns off audio and video and displays the black, blue,
or user logo background. Press it again to turn audio
and video back on.
Resize Adjusts how an image fits into the display area.
Freeze Halts action. Press again to resume action.
Illuminates the buttons on the remote control.
Navigates menus or controls the mouse pointer when
the projector is connected to a computer with the
mouse cable.
Pointer Activates the pointer tool. To use a different style
pointer, continue pressing the
Pointer button to select
the desired style.
Enter Selects a highlighted menu option or functions as the
left mouse button when the remote control is used in
place of your computer’s mouse.
Esc Displays the previous menu when using the menu
system. Functions as the right mouse button when the
remote control is used in place of your computer’s
mouse.
Menu Displays the on-screen menu system.
Help Displays the on-screen help system.
Source
buttons Switch to the equipment connected to the
corresponding port, or to EasyMP if you are projecting
wirelessly or using a memory card. Press
Search to
automatically find a source image from a connected
device.
Preview Previews connected sources (see page 5).
Preset Selects a preset selection of options for displaying
computer images.
Auto Optimizes a computer image.
Wall Shot Adjusts the colors for projecting on a wall,
blackboard, or other surface.
Focus Focuses the projected image.
Zoom Zooms the projected image.
Quick
Setup Automatically adjusts the image. Adjustments are
pre-selected in the projector menus.
Volume Increases or decreases the sound.
Num Turns on the numeric keypad. (Press this key until it
lights.)
ID Sets the remote control ID