Internal preamp and mixing board – ZETA Music Systems Strados Violin User Manual

Page 5

Advertising
background image

Owner's Manual

ZETA Strados Violin

5

Copyright 2000 ZETA Music Systems, Inc. All Rights Reserved.

instruments. These piezo crystals differ greatly from the ribbon transducers
commonly found in other types of electric violins, and are exclusive to ZETA
instruments.

The Strados pickup system is best known for it's true acoustic-electric tone, as
well as resistance to feedback.

INTERNAL PREAMP AND MIXING BOARD

The Strados Violin features a powerful internal preamp system. This 9- volt active
preamp also features an on-board mixer, which allows you to adjust volume for
each string on the Strados Violin, as well as master gain.

The internal preamp and mixing board features separate potentiometers, which
control string volume and overall gain. This is a 6-channel mixing board;
however, as the Strados Violin has only 4 or 5 strings, 1 or 2 of these channels
will not be used.

You may access the internal preamp and mixing board through the back
electronics plate. You will need a small phillips screwdriver, as well as a small
flathead screwdriver. Simply remove the phillips screws from the back plate.
Potentiometers can be adjusted using the small flathead screwdriver. Please note
that clockwise rotation decreases volume, whereas counter-clockwise rotation
increases volume.
















Diagram - Internal Preamp and Trim Pot Controls

OVERALL GAIN

E

A

G

D

C

(5-string
model only)

Not
Used

Advertising