ZETA Music Systems Strados Violin - Manual (Page 7)

Owner's Manual
ZETA Strados Violin
7
Copyright 2000 ZETA Music Systems, Inc. All Rights Reserved.
TROUBLESHOOTING TIPS
No Audio Output When Using the Instrument Audio Output Jack
1. Raise instrument volume, using the volume knob.
2. Raise volume of your amplification system.
3. Be sure that the 1/4" cable is securely inserted into the instrument.
4. Replace the internal 9-volt batteries.
No Audio Output When Using the Multi-Pin Output Jack and Synthony II
1. Raise instrument volume, using the volume knob.
2. Raise Synthony II volume, using the front-panel volume knob.
3. Raise volume of the amplification system.
4. Be sure that all cable from the instrument, Synthony II, and amplification
system are securely connected
Ebony Tuning Pegs Are Slipping and/or Not Turning
1. Apply peg dope to each tuning peg (in the case of Not Turning).
2. Apply plain white chalk to each peg (in the case of Slipping).
3. Replace the tuning pegs.
Humming, Hissing, or Other Types of Distortion Through Any/All Outputs
1. Be sure that all cables are securely connected.
2. Replace the internal 9-volt battery.
3. Be sure you are using perlon core strings, make sure the tailpiece and strings
are properly grounded.
4. Be sure you are using a shielded cable. (Not a speaker cable)
INFORMATION FOR CONTACTING ZETA TECHNICAL SUPPORT
If the above techniques for resolving your technical support issue with
your Strados Violin have proved unsuccessful, there are a number of
resources for additional information and support at your disposal.
First, contact your local Authorized ZETA Dealer, or the dealer where you
purchased your ZETA violin. Your dealer will have information regarding