Zanussi ZT 1012 - Manual (Page 10)

10
Depress the ON/OFF button : the mains-on light will
illuminate and the machine starts operating.
8. At the end of the programme
The machine stops automatically. The water of the last
rinse will remain in the tub.
If you have selected a programme which ends with the
water of the last rinse left in the tub (programmes G, H,
K, L, M, N), drain the water before opening the door.
Select programme “P” (drain) to drain only or “J”
(short spin) to drain the water and spin
.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
Remove the laundry from the drum and carefully check
that the drum is empty so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of whites.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
P0471S
ON-OFF