Zanussi ZT 1012 - Manual (Page 21)

21
Installation Instructions
Technical Specifications
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Should the appliance power supply cable need to
be replaced, this should be carried out by our
Service Force Centre.
DIMENSIONS Height 82 cm
Width 60 cm
Depth 54 cm
POWER SUPPLY VOLTAGE 230-240 V/50 Hz
TOTAL POWER ABSORBED 2050 W (10A)
WATER PRESSURE Minimum 0.05 MPa
Maximum 0.8 MPa
MAXIMUM RECOMMENDED LOAD Cotton, linen 5 kg
Synthetics 2 kg
Delicate fabrics 2 kg
Wool 1 kg
SPIN SPEED Maximum 1000 rpm
CONSUMPTION DATA FOR WASHING Energy 1.15 kWh
5 KG of NORMALLY SOILED COTTON Water 59 litres
ITEMS AT 60°C (PROGR. B) WITH COLD Time 140 mins
WATER FILLING
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.