Yamaha RX-V757 - Manual (Page 28)

26
AUTO SETUP
The results displayed in the RESULT:EXIT screen
are as follows:
SP The number of connected speakers
displayed in the order:
Front/Back/Subwoofer
DIST The distance of the speakers from this
unit displayed in the order:
Closest speaker distance/Farthest
speaker distance
LVL The speaker output level displayed in
the order:
Lowest output level/Highest output
level
• If you selected AUTO in step 5, “WAITING”
appears when the auto setup procedure is started,
then loud test tones are output from each speaker in
turn.
• If you selected DEFAULT, RELOAD or UNDO in
step 5, no test tones are output.
• If an ERROR screen appears, see “If an error
screen appears” on page 26.
• If a WARNING screen appears, see “If a warning
screen appears” on page 27.
y
You can display the detailed result information by using d and
ENTER to select “RESULT”. In the detailed result information
screen, you can switch information by pressing u / d / j / i.
7 Press j / i to select SET or CANCEL, then
press ENTER to return to the SET MENU
screen.
SET To apply the auto setup (YPAO)
settings.
CANCEL To cancel the auto setup (YPAO)
without making any changes.
y
If you are not satisfied with the result or want to manually adjust
each setup parameter, use the manual setup parameters (see page
52).
• If E-10 appears during testing, restart the procedure from step 3.
• To cancel the auto setup procedure before completion, press u.
■ If an error screen appears
Use u / d / j / i to select RETRY or EXIT, then press
ENTER.
RETRY To retry the auto setup procedure.
EXIT To exit auto setup.
Notes
WARNING (3)
RESULT
SP : 5/4/0.1
DIST: 10.0/ 12.0ft
LVL : -9.0/ +6.5dB
. >SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
p
p
RESULT:EXIT
ERROR
. E-9:USER CANCEL
.
. Don't operate
. any function.
. >RETRY EXIT
[ ]/[ ]:Up/Down
[ENTER]:Enter
p p