ZyXEL Communications NWA570N - Manual (Page 30)

Chapter 1
ZyXEL NWA570N User’s Guide
30
"
If you do not enable any wireless security on your ZyXEL Device, your network
traffic is visible to any wireless networking device that is within range.
1.7 Restarting the ZyXEL Device
Press and immediately release the RESET button to restart the ZyXEL Device.
"
Holding the RESET button in for five seconds or longer resets the device to the
factory-default settings.
1.8 Resetting the ZyXEL Device
If you forget the ZyXEL Device's IP address or your password, to access the ZyXEL Device,
you will need to reload the factory-default using the RESET button. Resetting the ZyXEL
Device replaces the current configuration file with the factory-default configuration file. This
means that you will lose all configurations that you had previously. The following parameters
will be reset to the default values.
1.8.1 Methods of Restoring Factory-Defaults
You can erase the current configuration and restore factory defaults in two ways:
1 Use the RESET button on the ZyXEL Device to upload the default configuration file
(hold this button in for at least five seconds).
2 Use the web configurator. Click System > Management > Configuration File. From
here you can restore the ZyXEL Device to its factory default settings.
Table 2 Factory Defaults
PARAMETER DEFAULT VALUE
IP Address 192.168.1.2
Password 1234
Wireless Security Disabled
SSID ZyXEL NWA570N