Xantrex Technology 600HD - Manual (Page 30)

Operating AC Appliances
975-0213-01-01 17
Operating an AC Appliance
Before operating your AC appliance, ensure that the battery
of the XPower Powerpack is fully charged. See “Recharging
with the AC Charger” on page 13 for details.
To operate an AC appliance:
1. Turn the AC outlet ON / OFF switch to the ON position.
The switch illuminates to indicate AC power is available
at the AC outlets.
2. Plug the AC appliance into one of the AC outlets and turn
the appliance on. XPower Powerpack will operate most
devices rated up to 480 W.
3. Recharge the XPower Powerpack as soon as possible
after each use.
When using the XPower Powerpack to operate an AC
appliance and the low battery warning sounds, the warning
gives you time to shut your AC appliance off before loss of
AC power.
If you ignore the warning, the XPower Powerpack
automatically turns off a few minutes later to prevent battery
damage.
In the event of an overload, low battery voltage or
overheating, the XPower Powerpack automatically shuts
down.