Xantrex Technology 600HD - Manual (Page 45)

Replacing the Incandescent Light
32 975-0213-01-01
Replacing the Incandescent Light
To replace the light bulb:
1. Turn the light switch off.
2. Pop out the plastic lens cover.
3. Gently grasp the bulb and twist clockwise to unscrew the
bulb.
4. Insert a replacement bulb of the same type and rating into
the light reflector assembly.
5. Gently grasp the bulb and twist counter-clockwise to
screw the bulb in.
6. Snap in the lens cover.
Replacing the External Fuse
The replacement fuse must be rated at 250 A, 32 V DC. See
page 9 for the fuse location.
To replace the external fuse:
1. Remove the fuse cover.
2. Unscrew the two bolts on the fuse.
3. Replace the fuse. Ensure that the replacement fuse is
rated at 250 A, 32 V DC and is of the same type.
4. Tighten the fuse with the two bolts.
5. Replace the fuse cover.