Olympus VS120 - Manual (Page 14)

Preparations before Starting Observation
10 Page
2-2 Stage operation
1. Tilt the lever (3) of the joystick to move in the X direction (1) or in the Y
direction (2).
 In case of VS120-S1 and VS120-L100:
X= Right-Left direction of the stage Y= Front-Back direction of the
stage
 In case of VS120-S5:
X= Front-Back direction of the stage Y= Right-Left direction of the
stage
2. Turn the focus dial (5) to move in the Z direction (4) (up and down) (to
bring a specimen into focus).
Supplementary explanations
 The joystick is operable when the controller power is on.
 To display it on the monitor, however, the VS120 software must be started.
 Operating the lever while pressing and holding down the high-speed button
(6) at the tip of the joystick allows you to move at a faster speed.
X (Right-Left)
direction
Z (Vertical)
direction
Focus adjustment
Y (Front-Back)
direction
(1)
(2)
(4)
(3)
(6)
(5)
(1)
(2)