ZyXEL Communications P-660RU-T V2 - Manual (Page 62)

Chapter 6 WAN Setup
P-660RU-T v2 User’s Guide
62
Figure 19 WAN Setup (PPPoE)
The following table describes the labels in this screen.
Table 12 WAN Setup
LABEL DESCRIPTION
Name Enter the name of your Internet Service Provider, for example “MyISP”. This
information is for identification purposes only.
Mode Select Routing (default) from the drop-down list box if your ISP allows multiple
computers to share an Internet account. Otherwise select Bridge.
Encapsulation Select the method of encapsulation used by your ISP from the drop-down list
box. Choices vary depending on the mode you select in the Mode field.
If you select Bridge in the Mode field, select either PPPoA or RFC 1483.
If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET
ENCAP or PPPoE.