Figure 26 remote management, Table 17 remote management – ZyXEL Communications P-660RU-T V2 User Manual
Page 77
Chapter 10 Remote Management Configuration
P-660RU-T v2 User’s Guide
77
Figure 26 Remote Management
The following table describes the labels in this screen.
Table 17 Remote Management
LABEL
DESCRIPTION
Server Type
Each of these labels denotes a service that you may use to remotely manage the
ZyXEL Device.
Access Status
Select the access interface. Choices are All, LAN Only, WAN Only and Disable.
Port
This field shows the port number for the remote management service. You may
change the port number for a service in this field, but you must use the same port
number to use that service for remote management.
Secured Client
IP
The default 0.0.0.0 allows any client to use this service to remotely manage the
ZyXEL Device. Type an IP address to restrict access to a client with a matching IP
address.
Apply
Click Apply to save your settings back to the ZyXEL Device.
Cancel
Click Cancel to begin configuring this screen afresh.