Zanussi ZWF 1311 W - Manual (Page 10)

10
Operating Sequence
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 95°C, with the machine
empty, in order to remove any manufacturing residue
from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1.Load the laundry
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
main wash compartment
.
If you wish to carry out the prewash, pour detergent into
the appropriate compartment marked
.
3.Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked ,
without exceeding the «MAX» mark.
Close the drawer gently.
C0065 C0064
P0004
4. Switch the machine on and
select the desired programme
Turn the selector dial to the desired programme to
switch the appliance on. The display will show the
duration of the selected programme.
To switch the appliance off turn it to “O” Off position.
The “Start/Pause” button light will start flashing.
5. Select the spin speed or the
RINSE HOLD option
Press the “Spin” button repeatedly, in order to select the
desired spin speed or the
“Rinse Hold” option. The
relevant light will light up.
If you select the
“Rinse Hold” option, the machine
will stop at the end of the programme with the water still
in the tub.
ZWF 1111 W
ZWF 1311 W
6. Select the desired options
Depress the relevant buttons to select the required
options. The corresponding light illuminates.
Night
Cycle Option Load
Prewash
Quick
Extra rinse
1/2
1300
1100
900
700
Spin
1100
900
700
500
Spin
2.05
95°
60°
40°
30°
60°
30°
Cottons
30°
Rinses
Wool
40°
Delicates 40°
Spin
Drain
Off
40°
30° Synthetics
Mini 30°