Zanussi ZWF 1311 W - Manual (Page 7)

7
• Select programme “Spin”. Select the spin speed by
means of the relevant button and then depress the
Start/Pause button. The water is emptied out and
the laundry is spun at the selected spin speed.
Attention! Before selecting the “Drain” or the “Spin”
programmes, the selector dial must to be turned to the
“O” Off position.
4 “Night Cycle” button
When you choose this option, the machine will not
drain the water of the last rinse, so as not to crease the
laundry. As all spinning phases are suppressed, this
washing cycle is very quiet and it can be useful at night
or in times with a more economical power rate.
On cotton and synthetic programmes the rinses will be
performed with more water.
At the end of the cycle, the door is locked, the light of
the “Start/Pause” button goes out, the “End cycle”
light illuminates, the light of “Night Cycle” button
and the “Door” light remain lit to indicate that the water
must be drained and a flashing zero will appear on the
display.
To complete the cycle, there are 2 possibilities for
emptying out water:
• Select programme “Drain”: the water is emptied out
without spinning.
• Select programme “Spin”. Select the spin speed by
means of the relevant button and then depress the
Start/Pause button. The water is emptied out and
the laundry is spun at the selected spin speed.
Attention! Before selecting the “Drain” or the “Spin”
programmes, the selector dial must to be turned to the
“O” Off position.
5 “1/2 Load” button
Select this option to reduce water consumption on the
rinse cycle when washing ONLY a smaller load of
cottons or linens (maximum load size = 2,5 kg). The
machine perform 2 rinses instead of 3.
6 “Option” button
Press this button to select the following options:
●
Prewash: select this option if you wish your laundry
to be prewashed before the main wash (not available
for Wool and Mini 30° programmes).
The prewash ends with a short spin in programmes
for cotton and synthetic fabrics, whereas in the
programme for delicate fabrics the water is only
drained.
●
Quick: select this option for laundry that is only
slightly soiled (not available for Wool, Mini 30°
and E-programmes).
The washing time will be reduced according to the
type of fabric and the selected temperature.
●
Extra rinse: This option can be selected with all
programmes, except the wool programmes and Mini
30°. The machine will add 2 rinses to the selected
programme.
This option is recommended for people who are
allergic to detergents, and areas where the water is
very soft.
The Prewash, the Quick and the Extra rinse options
cannot be selected together by means of the relevant
button.
7 Display
The following pieces of information are shown on the
display:
• Duration of washing programme in hours and
minutes, after you have selected a programme.
While the programme is running (after you have
pressed the “Start/Pause” button), the displayed time
value decreases by one unit every minute.
• The washing machine has stopped with water in
the tub, at the end of a programme with the
“Rinse Hold” or “Night Cycle”
option: this is indicated by a flashing zero. The
“Door” light will be lit and the door will be locked.
• The washing machine has completed the
programme: this is indicated by a flashing zero. The
zero will reappear when you switch the washing
machine on, unless the previous programme has been
erased by turning the programme selector dial to the
“O” Off position. The “Door” light will be off and
the door can be opened.
2.05