Yamaha HTR-5790 - Manual (Page 35)

31
PLAYBACK
BA
S
IC
OPERA
T
ION
To listen with headphones (SILENT CINEMA)
The SILENT CINEMA mode allows you to enjoy multi-
channel music or movie sound, including Dolby Digital
and DTS surround, through ordinary headphones.
SILENT CINEMA activates automatically whenever you
connect headphones to the PHONES jack while listening
to CINEMA DSP or HiFi DSP sound field programs. The
“SILENT CINEMA” indicator lights up on the front panel
display. (If the sound field programs are off, you listen
with normal stereo reproduction.)
This unit will not be set to the SILENT CINEMA mode when
MULTI CH INPUT is selected as the input source.
To adjust the tone
You can adjust the bass/treble
balance for the front left/right and
center channels.
Press TONE CONTROL
repeatedly on the front panel to
select TREBLE or BASS.
Select TREBLE, then rotate
PROGRAM to the right or left to
increase or decrease the high-
frequency response.
Select BASS, then rotate PROGRAM to the right or left to
increase or decrease the low-frequency response.
To cancel the tone control, press TONE CONTROL
repeatedly to select BYPASS.
• If you increase or decrease the high-frequency or the low-
frequency sound to an extreme level, the tonal quality of the
surround speakers may not match that of the front left/right and
center speakers.
• TONE CONTROL is not effective when THX (page 41) or
DIRECT STEREO (page 33) program is selected, or when
MULTI CH INPUT is selected.
• TONE CONTROL is not effective for headphones. Use HP
TONE CTRL to adjust bass/treble balance for the headphones
(page 53).
To mute the sound
Press MUTE on the remote control.
“MUTE” blinks on the front panel
display.
To resume the audio output, press
MUTE again. (or press VOL –/+). “MUTE” disappears
from the display.
y
You can adjust the muting level (see page 53).
■ Selecting the MULTI CH INPUT
Press MULTI CH INPUT so that “MULTI CH INPUT”
appears in the front panel display and video monitor.
When “MULTI CH INPUT” is shown on the front panel display
and/or the video monitor, no other source can be played. To select
another input source with INPUT (or one of the input selector
buttons), press MULTI CH INPUT to turn off “MULTI CH
INPUT” from the front panel display and the video monitor.
■ Playing video sources in the
background
You can combine a video image from a video source with
a sound from an audio source. For example, you can enjoy
listening to classical music while having beautiful scenery
from the video source on the video monitor.
Use the input selector buttons to select a video source,
then select an audio source.
If you want to enjoy an audio source connected to the MULTI CH
INPUT jacks together with a video source, first select the video
source and then press MULTI CH INPUT.
Note
Notes
TONE CONTROL
PROGRAM
MUTE
Note
Note
MULTI CH
INPUT MULTI CH IN
Front panel Remote control
or
TUNER PHONO
V-AUX
DTV DVR/VCR2 VCR 1 DVD
CBL/SAT MD/TAPE CD-R
CD MULTI CH IN
Audio sources
Video sources
00_HTR-5790U_EN.book Page 31 Tuesday, December 9, 2003 9:16 AM