Manual setup: option, 4 option menu, A)display set – Yamaha HTR-5790 User Manual

Page 60

Advertising
background image

56

SET MENU

■

Display set

DISPLAY SET

MANUAL SETUP > OPTION MENU > DISPLAY SET >

Dimmer

DIMMER

Use to adjust the brightness of the front panel display.
Choices: –4 to

0

OSD shift

OSD SHIFT

Use to adjust the vertical position of the OSD.
Choices: +5 (downward) to –5 (upward)
• Press + to lower the position of the OSD.
• Press – to raise the position of the OSD.

Gray back

GRAY BACK

Selecting AUTO for the on-screen display setting displays
a gray background when there’s no video signal input.
Nothing is displayed if OFF is selected.
Choices:

AUTO

, OFF

If “GRAY BACK” is set to OFF, no information will be
displayed on the screen when video signals are not being input.

Video conversion

V CONV.

Use this feature to turn on/off the conversion of composite
signals to both S-video and component signals. This
allows you to output coverted video signals from the S-
video jack or the component video jack when no S-video
or component signals are input. This feature also converts
S-video signals to component signals when no component
signals are input.
Choices:

ON

, OFF

• Select OFF not to convert any signals.
• Select ON to convert composite signals to S-video and

component signals, and to convert S-video signals to
component signals.

• Converted video signals are only output to the MONITOR OUT

jacks. When recording you must make the same type of video
connections (composite or S-video) between each component.

• When converting S-video signals from a VCR to component

video signals, the picture quality may suffer depending on your
VCR.

Component OSD

CMPNT OSD

Use this feature to turn on/off OSD output to the
COMPONENT VIDEO MONITOR OUT jacks when
using the set menu, test tone or parameter functions.
Choices:

ON

, OFF

• Select ON to output the OSD signals from

COMPONENT VIDEO MONITOR OUT jacks.

• Select OFF if you do not want to output the OSD

signals from COMPONENT VIDEO MONITOR OUT
jacks.

Set menu functions even when OFF is selected.

■

Memory guard

MEMORY GUARD

Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
MANUAL SETUP > OPTION MENU > MEMORY
GUARD >

Choices: ON,

OFF

Select ON to protect:
• DSP program parameters
• All SET MENU items
• All speaker levels
• The on-screen display (OSD) mode
When MEMORY GUARD is set to ON, you cannot use
the test tone or select any other SET MENU items.

Manual setup: OPTION

Note

. A)DISPLAY SET

B)MEMORY GUARD

C)PARAM. INI

D)ZONE SET

: Up/Down

p

/p

: Select

- / +

4 OPTION MENU

/

: Up/Down

p

p

-/+ : Select

. DIMMER;;;;;;;;;0

OSD SHIFT;;;;;;0

GRAY BACK;;;AUTO

V CONV.;;;;;;;ON

CMPNT OSD;;;;OFF

A)DISPLAY SET

Notes

Note

/

: Exit

p

p

-/+ : Select

[OFF

ON

B)MEMORY GUARD

00_HTR-5790U_EN.book Page 56 Tuesday, December 9, 2003 9:16 AM

Advertising