ZyXEL Communications Omni 56K II - Manual (Page 70)

Omni 56K II and Omni 56K Plus II User’s Guide
5-24 Command Sets
COMMAND FUNCTION OPTION DEFAULT DESCRIPTION
+VTD Set default duration of
DTMF tone. 1-255 100 Unit: 0.01 second.
+VIT Inactivity timer. 0-255 70 Unit: 0.1 second.
5.4 Voice Shielded DTE Commands
Table 5-13 Voice Shielded DTE Commands
COMMAND DESCRIPTION
<DLE>p Pause, suspend voice data to the output device in playback state.
<DLE>r Resume, resume suspended voice data in playback state.
<DLE><ETX> Terminate voice playback state, switch to online voice command mode after
completing remaining data in buffer.
5.5 Voice Shielded DTE Responses
Table 5-14 Voice Shielded DTE Responses
RESPONSE CODE DESCRIPTION
<DLE>0 - <DLE>9
<DLE>A-<DLE>D
<DLE>*,<DLE>#
DTMF digit detected
<DLE>a Answer Tone detected
<DLE>b Busy detected
<DLE>c Calling Tone detected
<DLE>d Dial tone detected
<DLE>e European Data Modem Calling Tone detected
<DLE>f Bell Answer Tone detected
<DLE>h The local handset is on hook
<DLE>s Silence detected
<DLE>H The local handset is off hook