ZyXEL Communications omni.net LCD series - Manual (Page 51)

omni.net LCD series Quick Start Guide
6-5
Set up TCP/IP for PPP
Step 1. Choose Control Panels from Apple Menu and open the TCP/IP control panel. You should
see the TCP/IP window shown below:
Step 2. Choose PPP from the “Connect via” pop-up menu.
Step 3. Choose your configuration method from the “Configure” pop-up menu. For example, Using
PPP Server.
Step 4. The most common selection is Using PPP Server which causes OT/PPP to request IP
address from the server when it connects.
Step 5. Enter name server addresses.
Step 6. Close and save.
Select PPP.
Select your
configuration
method.
Enter your
name server
address(es).
Close and
save.