Yamaha RX-V393RDS - Manual (Page 11)

FM
ANT
AM
ANT
GND
75 Ω
UNBAL.
GND
MONITOR OUT VIDEO
IN OUT VCR
IN OUT VCR
PHONO
CD
VIDEO TAPE
PB
REC
OUT
1
3 4
VIDEO
MAIN R L SURROUND R L CENTER SUB
WOOFER
6CH
DISCRETE
INPUT
VIDEO
SIGNAL
TAPE
/MD
AUDIO SIGNAL
AC-3 RF
OUT
AC-3 RF
IN
DIGITAL
IN
DIGITAL
OUT
VIDEO OUT
AUDIO OUT
6CH DISCRETE OUTPUT
CENTER SURROUND MAIN
SUB
WOOFER
10dB 0dB
MAIN
LEVEL
11
English
Notes for RX-V393RDS
• The laserdisc player (or another unit) must be also
connected to the VIDEO AUDIO SIGNAL input terminals of
this unit for playing a source with the Dolby Pro Logic
Surround decoded or in normal stereo (or monaural).
•
The discrete signals input to this unit cannot be recorded by
a tape deck, MD recorder or VCR. To record a source played
on the laserdisc player (or another unit), it must be
connected to the VIDEO AUDIO/VIDEO SIGNAL input
terminals of this unit.
• If you made no connection to the SUBWOOFER input
terminal of this unit or you will not use a subwoofer, you
should make a setting for distributing signals at the
SUBWOOFER channel to the right and left MAIN output
terminals on the Dolby Digital (AC-3) decoder etc.
For details, refer to the owner’s manual for the Dolby Digital
(AC-3) decoder etc.
Dolby Digital (AC-3) decoder
RF Demodulator
Laserdisc player with AC-3 RF output or
another unit
RX-V393RDS
(Example)