Yamaha RX-V393RDS - Manual (Page 27)

27
English
1
Select the source to be recorded.
2
Play the source and then turn the VOLUME control up
to confirm the input source. (For detailed information
on the tuning operations, refer to the page 29.)
3
Begin recording on the tape deck (or MD recorder etc.)
or VCR connected to this unit.
4
If the tape deck (or MD recorder etc.) is used for
recording, you can monitor the sounds being recorded
by pressing TAPE/MD MONITOR (MON) so that the
“TAPE MON” indicator lights up on the display.
Notes
● The settings of DSP and the VOLUME, BASS, TREBLE
and BALANCE controls have no effect on the material
being recorded.
● In step 1, do not make an input source selection so that
“6ch” appears on the display. Signals input to this unit’s
6CH DISCRETE INPUT terminals cannot be recorded by a
tape deck, MD recorder or VCR.
l6
20
28
40
60
l2
8
4
2
0
–dB
VOLUME
TO RECORD A SOURCE TO TAPE (OR MD)
2
l6 20
28
40
60
l2
8
4
2
0 –dB
1 4
TUNER CD PHONO
DVD/LD TV/DBS
CD PHONO
TAPE/MD MON 2CH/6CH
2
l6 20
28
40
60
l2
8
4
2
0 –dB
1 4
RX-V393RDS RX-V493RDS
RX-V393RDS RX-V493RDS
TAPE/MD
MONITOR
VCR
TUNER PHONO