ZyXEL Communications 2864 - Manual (Page 78)

6–12
AUDIO OPTIONS
SPEAKER CONTROL
SPEAKER VOLUME
RING VOLUME
Note: Only the expedited break is implemented in transmission, but all
types of break are accepted in reception.
ALWAYS OFF ATM0 The speaker is always OFF. The ring is inde-
pendently controlled by RING VOLUME.
+ ON UNTIL
CONNECT
ATM1 The speaker is ON until a carrier is detected.
(Default)
ALWAYS ON ATM2 The speaker is always ON.
DIALED TO
CONNECT ATM3 The speaker is ON after the final digit is dialed
out and the speaker is OFF when a carrier is de-
tected. Tone dialing is inaudible.
0 - 7 ATL0
...
ATL7
Default is 4. The higher the value, the higher the
volume. If not
ATM0 , the speaker volume is set
to maximum when in call progress monitoring.
0 - 7 ATN0
...
ATN7
Default is 5. The higher the value, the higher the
volume. A value of 0 disables the ring function.