Zanussi ZWF 1651W - Manual (Page 8)

DELAY START: this option makes it possible to
delay the start of the washing programme by 30 min -
60 min - 90 min, 2 hours and then by 1 hour till 20
hours. The delay you have selected is indicated in the
display.
You must select this option after you have set the
programme and before you press the Start/Pause
button.
You can cancel the delay time at any moment, before
you press the Start/Pause button. If you have already
pressed the Start/Pause button and you wish to cancel
the Delay time proceed as follows:
1. set the washing machine to PAUSE by pressing the
Start/Pause button;
2. deselect the Delay start option, changing the status;
3. press the Start/Pause button to start the
programme.
Important!
The selected delay can be changed only after selecting
the washing programme again.
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
Start/Pause button. After you have closed the door,
press the Start/Pause button again.
The Delay Start cannot be selected with Spin, Delicate
Spin and Drain programmes.
PREWASH: select this option if you wish your
laundry to be prewashed before the main wash (not
available for wool and handwash cycle, Minipr. 30 and
silk).
The prewash phase ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas in
the programme for delicate fabrics the water is only
drained.
INTENSIVE: for heavy soiled laundry. This
option can be selected only for cottons and synthetics.
The washing time will be prolonged according to the
Change Options Exit
Delay Start
Start in 30 min 11.25
Temp. Spin Change Options Exit
Delay Start
No 10.55
Temp. Spin
8
Exit button allows you to return to the previous
selection.
Depending on the programme, different functions can
be combined. These must be selected after choosing the
desired programme and before depressing the
Start/Pause button.
By depressing the Options button, all the symbol icons,
allowed for the selected programme will appear in the
display.
The first option will start flashing. Its name and
status will appear in the display.
If you want to change the option status, press Change
button. A line will appear below the selected icon,
indicating that the option is set.
To select the other options press again the Options
button and proceed as before.
Once you have completed the selection of the options,
pressing the Exit button, the selected icons will remain
fixed in the display.
Note: To modify the already chosen option selections,
repeat the previous procedure.
Important! While selecting the option, if you press the
temperature Temp., Spin, or Start/Pause button, the
relative function will be executed.
EXTRA RINSE: this option can be selected with
all programmes, except the wool/handwash programmes
and miniprogramme. The machine will add 2 rinses for
cottons and 1 rinse for synthetics, delicates and silk.
This option is recommended for people who are allergic
to detergents, and in areas where the water is very soft.
TIME SAVING: this option can be used for lightly
soiled cotton, synthetic or delicates items in order to
obtain a good washing programme in a short time. The
washing time will be reduced according to the type of
fabric and the selected temperature. Selecting this option
«Short» or «Very Short» will be shown in the display.
Change Options Exit
COTTON
CYCLE END AT
08.30
10.55
60°C 1400
Temp. Spin
132985250.qxd 19/12/2005 16.57 Pagina 8